(alphabetical order of last names and from newer one)
Aspart, A. et
al., “Efficiency Of Electropolishing Versus Bath Composition And Aging:
First Results,” SRF2005, Ithaca, NY, USA, Poster ThP03.
Benaroya, R. et al.,
“Tests on superconducting helix resonators,” Appl. Phys. Lett. 21
(1972) 235.
Boffo, C. et
al., “EP on Small Samples Studies at Fermilab,” SRF2005, Ithaca,
NY, USA, Poster ThP01
Diepers, H. et al, “A
New Method of Electropolishing Niobium,” Phys. Lett. 37A (1971)
139.
Eozenou, F. et
al., “Aluminum and Sulfur Impurities in Electropolishing Baths,”
SRF2005, Ithaca, NY, USA, Poster ThP02
Escherich, K. et al.,
“Electropolishing at DESY, A Setup for Multi-Cell Resonator
Treatment,” Proc. SRF2001, Tsukuba, Ibaraki, Japan, 2001, p.
508.
Geng, R. et al., “A 1500 MHz
Niobium Cavity Made of Electropolishied Half-Cells,” Proc. PAC2003,
Portland, USA, p.1312.
Kelly, M. “ANL Proposal to
Perform Electropolishing for the ILC,” TTC meeting, Frascati, Italy,
5-7 December 2005.
Kneisel, P.
“Some History of Electropolishing of Niobium 1970 – 1990,”
TTC meeting, Frascati, Italy, 5-7 December 2005.
Kneisel, P. “Surface
Preparations of Niobium,” Proc. Workshop on RF Superconductivity,
Karlsruhe, 1980, p. 27. KFK-3019.
P. Kneisel, C.Lyneis and J.P.Turneaure, IEEE Trans. Nucl. Sci. NS-22
(1975) 1197.
Knobloch, J. et al.,
"High-Field Q Slope in Superconducting Cavities Due to MagneticField
Enhancement at Grain Boundaries," Proc. SRF1999, Santa Fe, NM, USA, p.
238.
Lilje, L. et al.,
“Electropolishing and in-situ Baking of 1.3 GHz Niobium
Cavities,” Proc. SRF1999, Santa Fe, NM, USA, TUA001.
Mammosser, J. et al.,
“Status of the Production Electropolishing System at JLAB,” Proc.
PAC2003, Portland, USA, p. 2860.
Matheisen, A.
“Status of EP at DESY (update),” TTC meeting, Frascati, Italy,
5-7 December 2005.
Matheisen, A. “EP
Activities under Care WP 5” TTC meeting, Frascati, Italy, 5-7 December
2005.
Matheisen, A. et al.,
“Electro-Polishing Surface Preparation for High Gradient Cavities at
DESY,” Proc. PAC2005, Knoxville, USA, p.3304
Matheisen, A. et al.,
“Electro Polishing of Niobium Cavities at DESY,” Proc. LINAC2004,
L�beck, Germany, p. 824.
Proch,
D., Summary talk, CARE meeting, CERN, Nov. 23-25, 2005.
Saito, K. ,
“Development of Electropolishing Technology for Superconducting
Cavities,” Proc. PAC2003, Portland, USA, p. 462.
Saito, K. et al., Proc. 4th SRF Workshop, KEK, Tsukuba, Ibaraki, Japan,
1989, p.635.
Schultz, E. et al.,
“Engineering Solutions for the Electro-Polishing of Multi-Cell
Superconducting Accelerator Structures,” Proc. SRF2001, Tsukuba,
Ibaraki, Japan, 2001, p. 481.
Shepard, K.W., et al.,
“Prototype Superconducting Triple-Spoke Cavity for beta=0.63,”
Proc. PAC2005, Knoxville, TN, USA, p. 4338. Also, private
communication.
Steinhau-K�hl, N., et al.,
"Basic Study for the Electropolishing Facility at DESY", Proc. SRF2001,
Tsukuba, Ibaraki, Japan, 2001, p. 620.
Visentin,
B. , “Last Advances of SRF Cavities for e- Linear Accelerators,”
CARE meeting, CERN, Nov. 23-25, 2005.
Forgot your password?
